Antibacterial effects of dentifrices against Streptococcus mutans in children: a comparative in vitro study.

Fluoridated dentifrices have antibacterial effects on children's teeth. On the other hand, the side effects encountered with the use of them have led researchers to look for safe alternatives. This study aimed to determine the antibacterial effect of different commercially available fluoride-free dentifrices on Streptococcus mutans (S. mutans) in comparison with different concentrations of fluoridated dentifrices. Study groups comprised of fluoride-free dentifrices, which contain Probiotic (Activated Charcoal Probiotic Dentifrice-Group P), Aloe Vera-Group AV and Salivary Proteins-Group SP. Fluoridated dentifrices containing 1450 ppm fluoride-Control Group 1 and 500 ppm fluoride-Control Group 2 served as control groups. Antibacterial activity was assessed by Minimum Inhibitory Concentrations and agar well diffusion assays on S. mutans. Biofilm inhibition assay was performed with dentifrices, which had antibacterial activities, and a negative control phosphate-buffered saline (Group PBS) on sterile hydroxyapatite discs against S. mutans. Statistical evaluation was performed. Only group AV showed an antibacterial effect on S. mutans, while control groups showed a similar antibacterial effect. The mean number of viable bacteria present in S. mutans biofilm in Control Group 1 and 2 and Group AV were statistically significantly lower than that in Group PBS, but there were no statistically significant differences between Control Groups and Group AV. Antibacterial activity of commercial dentifrices against S. mutans may be exerted by antibacterial components other than fluoride. Aloe vera-containing toothpaste showed an antibacterial effect on S. mutans, although not as much as the fluoride-containing toothpastes in the control groups. However, further in vivo and long-term studies are required.

Remineralization potential of dentifrices with calcium sodium phosphosilicate and functionalized tri-calcium phosphate in the deeper incipient carious lesions: An in vitro study.

OBJECTIVES: This study evaluated the remineralization potential of calcium sodium phosphosilicate and functionalized tri-calcium phosphate (f-TCP) dentifrices in deeper incipient carious lesions (ICLs). MATERIALS AND METHODS: Artificial ICLs were created by placing premolars into demineralizing solutions. Teeth were randomly assigned into four groups: calcium sodium phosphosilicate (Group 1), f-TCP (Group 2), 1450 ppm fluoride (Group 3), and distilled water (Group 4), which were subjected to 10-day pH cycling. Mineral density (MD) was assessed using microcomputed tomography (Micro-CT), while hardness (H) and elastic modulus (EM) were assessed using nanomechanical testing. RESULTS: MD % gain was higher in Groups 1-3 than in Group 4. In addition, Groups 1 and 2 exhibited significantly higher MD % gain than Group 3. Also, Groups 1-3 showed significantly higher EM and H values than Group 4 in the outer enamel area; yet, Groups 1 and 2 displayed significantly higher EM and H values than Groups 3 and 4 in the inner enamel. CONCLUSIONS: The MD, EM, and H of ICLs significantly increased with the addition of calcium sodium phosphosilicate or f-TCP to fluoridated dentifrices compared to standard fluoride dentifrices. The added active ingredients remineralized the deeper parts of the ICLs, while remineralization at the lesion surface was similar between tested dentifrices.

Efficacy of a stannous fluoride dentifrice for relieving dentinal hypersensitivity in Chinese population: an 8-week randomized clinical trial.

OBJECTIVES: To compare the effectiveness of using a 0.454% stannous fluoride-containing dentifrice twice daily in relieving dentinal hypersensitivity (DH) in a Chinese population. MATERIALS AND METHODS: This was a single-centre, randomized, controlled, examiner-blind, three-treatment-arm, parallel-group study in participants with clinically diagnosed DH. Subjects who met inclusion criteria (n = 197) were randomly allocated into 3 groups: test group (n = 66)-using a 0.454% stannous fluoride-containing dentifrice twice daily; positive control group (n = 64)-using a 5.0% calcium sodium phosphosilicate-containing dentifrice twice daily; negative control group (n = 67)-using a 1150 ppm of NaF dentifrice twice daily. Status of DH was assessed at week 4 and week 8 by the same independent examiner. Changes from baseline in Schiff sensitivity score, tactile threshold and Dentine Hypersensitivity Experience Questionnaire (DHEQ) score were analysed using analysis of covariance models. The DHEQ evaluated subject-perceived oral health-related quality of life (OHRQoL). RESULTS: Statistically significant improvements in mean Schiff scores (p < 0.0001 for all products at Weeks 4 and 8), tactile threshold (p < 0.0001 for test and negative control at Weeks 4 and 8: Week 4 p = 0.0040 and Week 8 p < 0.0001 for positive control) and all DHEQ scores (p < 0.01 for all groups) were observed. No statistically significant differences were observed in the adjusted mean between all dentifrices at both timepoints, potentially driven by a placebo effect. Forty-two treatment-emergent adverse events (TEAEs) were reported (n = 32 subjects), with 2 serious AEs (n = 1) in the test group. TEAEs were not considered treatment-related. CONCLUSIONS: All groups demonstrated statistically significant improvements in Schiff score, tactile threshold and OHRQoL. However, due to a possible placebo effect in the negative control, there were no statistically significant differences between the dentifrices. CLINICAL RELEVANCE: This study adds to the growing research exploring why the placebo effect is a common phenomenon in DH studies. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT04950465.

Evaluation of Stain Removal Efficacy and Color Stability of Three Different Dentifrices on Artificially Stained Enamel Surface-An In Vitro Study.

AIM: The aim of the present study was to assess the stain removal ability and color stability of three distinct dentifrices on artificially stained enamel surface. MATERIALS AND METHODS: This study included 75 intact, healthy premolars free of dental caries that were extracted during orthodontic therapy. The samples were allowed to dry for 6 hours after being submerged in the prepared tea solution for roughly 18 hours every day. Then this procedure was repeated for seven successive days. All samples were randomly divided into three experimental groups with 25 samples in each group. Group I: control dentifrice, group II: dentifrice containing hydrogen peroxide, group III: dentifrice containing papain and bromelain. A specially designed toothbrushing simulator was used to brush every sample in the relevant group. Using a spectrophotometer and a measurement program, color measurement was evaluated after staining process after 4 weeks and 8 weeks of teeth cleaning. Using a profilometer, the surface roughness values (Ra) were assessed. RESULTS: After 8 weeks of brushing of stained samples, the color stability was better in dentifrice containing hydrogen peroxide (1.14 ± 0.11) followed by dentifrice containing papain and bromelain (1.22 ± 0.08) and control group (1.30 ± 0.09). And after 8 weeks of brushing of stained samples, the surface roughness was more in dentifrice containing hydrogen peroxide (0.237 ± 0.02) followed by dentifrice containing papain and bromelain (0.229 ± 0.13) and control group (0.207 ± 0.05). CONCLUSION: The present study concluded that the dentifrice containing hydrogen peroxide showed a superior whitening effect on the stained enamel surface than dentifrice containing papain and bromelain and control dentifrice. CLINICAL SIGNIFICANCE: The development of various dentifrice products has been greatly aided by the increased demand for an improved esthetic appearance. Teeth's natural color and any external stains that could accumulate on the tooth surface combine to determine a tooth's color. Additionally, the use of whitening dental pastes to remove external stains has grown in favor. With the development of these whitening toothpastes, dentifrices' ability to lessen or eliminate extrinsic dental stains has increased. How to cite this article: Mishra D, Kamath DG, Alagla M, et al. Evaluation of Stain Removal Efficacy and Color Stability of Three Different Dentifrices on Artificially Stained Enamel Surface-An In Vitro Study. J Contemp Dent Pract 2024;25(1):68-71.

Remineralisation of enamel and dentine with stabilised stannous fluoride dentifrices in a randomised cross-over in situ trial.

OBJECTIVES: To compare the remineralisation efficacy and ion bioavailability of two novel SnF2-containing dentifrices in a blinded, cross-over, randomised in situ clinical study. METHODS: Six participants wore removal palatal appliances holding human enamel and dentine blocks with subsurface lesions. Appliances were worn for two treatment periods of 14 consecutive days each, with a one-week washout period in-between. Participants were randomly allocated to rinse with a 1:5 diluted coded slurry of one of two dentifrices containing either 5 % casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) +1100 ppm F as SnF2 [MIPOP], or 1100 ppm F as SnF2 [CT], for 1 min, four times a day. Saliva was collected post-treatment and analysed for tin, calcium, inorganic phosphate and fluoride ions using atomic absorption spectrophotometry and ion chromatography. Enamel and dentine lesions were analysed for percent remineralisation (%R) using transverse microradiography and percent surface microhardness recovery (%SMHR). RESULTS: MIPOP released significantly higher F (3.00 ± 0.27 mM), Ca (15.23 ± 3.23 mM) and Sn (1.18 ± 0.13 mM) into saliva whereas CT released 2.89 ± 0.32 mM F and only 0.84 ± 0.11 mM Ca and 0.28 ± 0.10 mM Sn. MIPOP produced significantly higher %R than CT: 25.6 ± 1.5 % compared to 15.2 ± 0.7 % in enamel, and 33.6 ± 3.1 % compared to 20.6 ± 1.1 % in dentine. Additionally, MIPOP produced significantly higher %SMHR (18.2 ± 7.9 %) compared to CT (4.1 ± 0.6 %). CONCLUSIONS: Both dentifrices promoted remineralisation, but the MIPOP dentifrice with added CPP-ACP and the ion-stabilising effects of CPP released higher amounts of bioavailable tin and produced significantly higher remineralisation and surface microhardness recovery. CLINICAL SIGNIFICANCE: Modern dentifrices contain SnF2 for a range of oral health benefits. Challenges associated with stability of these formulations can affect ion bioavailability, reducing efficacy. Two dentifrices with SnF2 promoted remineralisation in situ, however the dentifrice with the added saliva biomimetic CPP-ACP was superior and therefore may produce greater health benefits.

At-home bleaching versus whitening toothpastes for treatment of tooth discoloration: a cost-effectiveness analysis.

OBJECTIVES: This study aimed to analyze the cost-effectiveness of whitening toothpastes and at-home bleaching for the treatment of tooth discoloration. METHODOLOGY: A cost-effectiveness economic analysis was conducted, and eight randomized clinical trials were selected based on the whitening agent product used: blue covarine dentifrices (BCD), hydrogen peroxide dentifrices (HPD), dentifrices without bleaching agents (CD, negative control), and 10% carbamide peroxide (CP10, positive control) for at-home bleaching. The consumer/patient perspective was adopted, macro-costing techniques were used and a decision tree model was performed considering the costs in the American and Brazilian markets. The color change evaluation (ΔE*ab) was used to calculate the effectiveness of tooth bleaching. A probabilistic analysis was performed using a Monte Carlo simulation and incremental cost-effectiveness ratios were obtained. RESULTS: CP10 resulted in the highest cost-effectiveness compared to the use of dentifrices in both markets. In Brazil, HPD was more cost-effective than BCD and CD. In the US, the increased costs of HPD and BCD did not generate any whitening benefit compared to CD. CONCLUSIONS: CP10 was more cost-effective than BCD and HPD for tooth bleaching from the perspectives of the Brazilian and American markets. Decision-making should consider the use of CP10 for treating tooth discoloration.

Impact of toothbrush head configuration and dentifrice abrasivity on non-carious cervical lesions in-vitro.

OBJECTIVE: To investigate the effect of toothbrush head configuration and dentifrice slurry abrasivity on the development of simulated non-carious cervical lesions (NCCLs) in vitro. METHODS: Extracted premolars were randomly allocated into 15 groups (n = 16) generated by the association between toothbrush head configuration (flat-trimmed, rippled, cross-angled/multilevel/rubbers added, cross-angled/multilevel/flex head, feathered) and dentifrice slurry abrasivity (low/medium/high). Teeth were mounted on acrylic blocks and had their roots partially covered with acrylic resin, leaving 2-mm root surfaces exposed. Toothbrushing was performed for 35,000 and 65,000 double-strokes. Specimens were analyzed using non-contact profilometry for dental volume loss (mm3) and lesion morphology. Data was analyzed using ANOVA with pairwise comparisons and Kruskal-Wallis tests. RESULTS: The two-way interaction between toothbrush head configuration and slurry abrasivity was significant (p = 0.02). At 35,000 strokes, the flat-trimmed and cross-angled/multilevel/rubbers added toothbrushes caused the highest loss, when associated to the high-abrasive slurry (p<0.05); whereas cross-angled/multilevel/flex head showed the least loss, when associated to the low-abrasive (p<0.05). At 65,000, more dental loss was observed for all toothbrushes when associated to the high-abrasive slurry, with flat-trimmed causing the highest loss (p < 0.05). Lower dental loss rates were observed for cross-angled/multilevel/flex head associated to the low-abrasive slurry when compared to the other toothbrushes (p < 0.05), except to feathered (p = 0.14) and rippled (p = 0.08). Flat lesions (mean internal angle ± standard-deviation: 146.2°± 16.8) were mainly associated with low-abrasive slurry, while wedge-shaped lesions (85.8°± 18.8) were more frequent with medium- and high-abrasive slurries. CONCLUSION: The development, progression and morphology of simulated NCCLs were modulated by both toothbrush head configuration and dentifrice abrasivity. CLINICAL SIGNIFICANCE: Dental professionals should consider both the type of toothbrush and dentifrice abrasivity in the management plan of patients at risk of developing NCCLs.

Is the whitening effect of charcoal-based dentifrices related to their abrasive potential or the ability of charcoal to adsorb dyes?

OBJECTIVES: To evaluate if tooth color alteration of activated charcoal-based dentifrices may be attributed to the dye adsorption potential of charcoal (chemical action - C - slurry only) or to the association of dye adsorption with abrasion (chemo-mechanical action - CM- slurry/toothbrushing). Potential adverse effects in surface roughness, gloss, and wear were also assessed. METHODS: Bovine enamel/dentin specimens were randomly allocated into the groups according to treatments and test model (n = 15): deionized water (negative control- NC); Colgate Maximum Anticaries Protection (conventional toothpaste- positive control- PC); Colgate Luminous White Activated Charcoal (LW); Oral-B 3D White Therapy Charcoal (WT); Curaprox Black is White (BW); Dermavita Whitemax (Activated charcoal powder- WP). Specimens were exposed to the C or CM models, in 28-day staining-treatment cycling. Color change (ΔE00), whiteness index (ΔWID), percentage of alteration of surface roughness (%Raalt), and gloss (%GUalt) were calculated. Additional specimens (n = 9) were indented with a Knoop diamond and subjected to 100,000 abrasion cycles. Enamel wear was determined by calculating the decrease in indentations geometry. Data were analyzed by ANOVA/Tukey tests (α = 0.05). RESULTS: The CM-model produced lower color change (staining) than C (p = 0.0001). PC, LW, WT, BW, and WP showed similar color results for both models, differing from NC (p < 0.05).%Ra and%GU did not differ among the C-model groups (p > 0.05) and WP exhibited the highest variation (%Ra and%GU) under CM-model. Enamel wear values were lowest in the NC and PC groups, intermediate for LW, WT, BW, and highest for the WP (p < 0.05). CONCLUSION: Activated charcoal-based dentifrices have a similar ability to minimize tooth staining as the conventional toothpaste, with increased enamel wear potential in the long term (after 100,000 cycles). The activated charcoal powder damaged the enamel surface, showing a higher deleterious effect on enamel roughness, gloss, and wear. CLINICAL SIGNIFICANCE: Dentifrices containing activated charcoal do not provide superior results to minimize tooth staining compared to conventional toothpaste. Charcoal powder should be used with caution because it promotes higher superficial alterations on the enamel surface.

Epidemiology of plaque-induced gingivitis among 12-15-year-old Chinese schoolchildren: A study based on the 2018 case definition.

AIM: To explore the epidemiology of plaque-induced gingivitis and related factors among Chinese adolescents. MATERIALS AND METHODS: This cross-sectional survey comprised 118,601 schoolchildren in the 12-15-year age group. Data came from the National Oral Health Survey in mainland China. The field investigation was conducted according to the World Health Organization guidelines. The new 2018 case definition for plaque-induced gingivitis was used. Participants underwent clinical examinations and completed a structured questionnaire. Bleeding on probing (BOP) was performed on all teeth. Multinomial logistic regression was used to explore the factors related to the extent of gingivitis. RESULTS: Nearly half of the study population (47.3%) had plaque-induced gingivitis; 23.9% and 23.3% presented with localised and generalised gingivitis, respectively. The first molars were the most affected by BOP. Well-established factors, such as demographic characteristics, socioeconomic status, local factors and smoking habits, were significantly associated with the extent of gingivitis. Odds ratios for localised and generalised gingivitis increased with the decrease in frequency of toothbrushing with a fluoride dentifrice. CONCLUSIONS: The study population had high plaque-induced gingivitis prevalence. The extent of gingivitis appeared to have a dose-response relationship with the frequency of toothbrushing with a fluoride dentifrice.

Bioactive glass and arginine dentifrices reduce root sensitivity during daily activities following non-surgical periodontal therapy: A randomized controlled trial.

BACKGROUND: Evidence on the efficacy of calcium sodium phosphosilicate (CSPS) and arginine dentifrices on reducing root sensitivity (RS) following non-surgical periodontal therapy (NSPT) is limited. The aim of this study was to compare the efficacy of these dentifrices in reducing RS during daily activities in patients undergoing NSPT. METHODS: Using a double-blind randomized controlled trial, CSPS, arginine, or control dentifrices were randomly assigned to 45 RS individuals following NSPT. The participants used the dentifrices 2×/day for 8 weeks. A self-reported visual analog scale (VAS) was assessed during daily activities. RESULTS: Self-reported VAS scores were similar among the three groups at each time point. The with-in group analysis revealed that the arginine dentifrice reduced RS from Week 1-8 compared with baseline in response to cold. Similarly, the CSPS dentifrice reduced RS at Week 4 and 8. The CSPS and arginine dentifrices exhibited RS relief resulting from toothbrushing starting at Week 4 and 2, respectively. In response to air, RS relief was observed from Week 4 in the arginine group. The number of patients with VAS > 2 in response to cold declined at Week 2 and 4 in the CSPS and arginine groups, respectively. In response to toothbrushing, only 10% in the test groups still had RS at Week 8. In response to air, the number of RS patients only in the arginine group decreased at Week 4. CONCLUSION: The CSPS and arginine dentifrices provided comparable RS relief during daily activities within 2-4 weeks and remained effective up to 8 weeks.

Color and surface roughness alterations of bulk-fill resin composites submitted to simulated toothbrushing with whitening dentifrices

Aim: To evaluate the surface roughness and color stability of bulk-fill resin composites after simulated toothbrushing with whitening dentifrices. The radioactive/relative dentin abrasion (RDA) and radioactive/relative enamel abrasion (REA) of dentifrices were also assessed. Methods: Specimens (n=10) of Tetric N Ceram Bulk Fill (TNCB), Filtek One Bulk Fill (FOB) resin composites, and Z100(Control) were prepared using a cylindrical Teflon matrix. Surface roughness (Ra, µm) was assessed by a roughness meter and the color evaluations (ΔEab , ΔE00 , WID ) were performed using a digital spectrophotometer based on the CIELAB system. Three measurements were performed per sample, before and after simulated toothbrushing with 3D Oral-B White Perfection (3DW) and Black is White (BW) dentifrices. The abrasivity (REA and RDA values) of the used dentifrices was also determined by the Hefferren abrasivity test. Results: The Ra values increased significantly in all resin composites after 3DW and BW toothbrushing. The acceptable threshold color varied among resin composites, and TNCB and Z100 presented the highest ΔEab and ΔE00 for BW dentifrice. The 3DW dentifrice was significantly more abrasive than BW dentifrice on enamel and dentin. Conclusions: simulated toothbrushing with tested whitening dentifrices increased the surface roughness at acceptable levels. The Tetric N Ceram Bulk-fill and Z100 composite showed the highest color alteration in BW. 3D White Perfection dentifrice was more abrasive on dentin and enamel than Black is White.

Influence of Different Mouthwashes on the Efficacy of Fluoridated Dentifrices in Prevention of Enamel Erosion: An In Vitro Study.

AIM: The purpose of the current study was to evaluate the impact of three various mouthwashes on the effectiveness of fluoride dentifrices in preventing enamel erosion. MATERIALS AND METHODS: A total of 120 sound intact human premolar teeth which were extracted for orthodontic treatment were selected for the study. A 3 × 3 mm window section was positioned in the middle of the coronal surface of the tooth in order to define the study area. Each sample was placed in a solution of 1% citric acid (pH 3.5) for 10 minutes in order to produce an eroded surface. All samples were divided into two main groups (60 samples each) as follows: Group A for sodium fluoride dentifrices and group B for stannous fluoride dentifrices, again it is subdivided into: CHX: Chlohex ADS®, EO: Listerine®, CPC: Colgate® Plax (20 samples in each subgroup). After that, samples underwent the pH cycling model for 5 days. Samples were examined for surface loss using a scanning electron microscope. RESULTS: In sodium fluoride dentifrices group, before intervention, the surface loss was 3.12 ± 1.03 in CHX group, 3.08 ± 1.20 in EO group, and 3.09 ± 0.96 in CPC group. After intervention, the less surface loss found with CHX group (2.18 ± 0.84), followed by CPC (2.34 ± 0.74) and EO group (2.46 ± 0.97). In stannous fluoride dentifrices group, before intervention, the surface loss in CHX group was 3.26 ± 1.19, in EO group, it was 3.18 ± 1.31, and in CPC group, it was 3.22 ± 1.06. After intervention, the less surface loss found with CHX: group (1.90 ± 0.54), followed by CPC (2.24 ± 0.28) and EO group (2.38 ± 0.20). CONCLUSION: The present study concluded that the fluoride dentifrices' preventive effects against tooth surface loss were unaffected by a different mouthwashes with varying compositions and major constituents. In terms of erosion, fluoridated toothpaste containing stannous fluoride was found to provide better surface loss protection than sodium fluoride. CLINICAL SIGNIFICANCE: Primary prevention and the eradication of contributing causes are the greatest strategies for preventing erosion. Simultaneously, antibacterial agent in the mouthwashes may help in enhancing the effect of fluoride in the enamel, owing to their high affinity for teeth structures. Therefore, in addition to cause-related treatment, further efforts to reduce tooth tissue loss are also necessary.

Qualitative Analysis of Opinions and Beliefs Associated with the Use of Tobacco Dentifrice among Individuals Attending a Tobacco Counselling Session.

BACKGROUND: Smokeless tobacco (SLT) use is positively associated with oral, oesophageal, and pancreatic cancers. The tobacco dentifrice is a type of SLT which is applied to the teeth and gums. It is available in different forms which include mishri, gul/gulmanjan, gudhaku, snuff, red tooth powder, and creamy snuff. This qualitative study aims to explore the opinions and beliefs associated with the harmful effects of tobacco dentifrice use. METHODOLOGY: Thirty in-depth interviews were conducted among tobacco dentifrice users visiting a dental hospital. The data were coded and analysed using thematic analysis in ATLAS.ti software 8. RESULTS: A total of 11 codes and six categories were generated which comprised of the reason for the initiation, awareness of health effects, perception of oral tobacco application, perception of quitting, the reason for continued use, and use in society. Family, peers, access to the product, curiosity were important factors to initiate the tobacco dentifrice use. Participants believed in the myth that tobacco dentifrice was beneficial for the teeth, gums, and bowel movements. The participants considered tobacco dentifrice to be less harmful than other forms of tobacco. However, some participants were aware of its adverse effects on health and have tried to quit in the past. None of the participants had taken any professional help for quitting. CONCLUSION: There were strong beliefs and myths among the participants that tobacco dentifrice was beneficial for oral and general health. There is a need to create awareness and improve the standard of the health warning of such products.

Influence of the combined effect of desensitizing dentifrices and universal adhesives on dentin bond strength under erosive conditions.

OBJECTIVE: This study aimed to evaluate whether the use of desensitizing dentifrices containing obliterating agents can affect bond strength of eroded/abraded dentin. METHODOLOGY: A total of 100 dentin samples were obtained from human molars. The teeth were cut into 3 mm-thickness discs and allocated in five groups (n=20), according to the toothpaste used: WoF - abrasion with fluoride-free toothpaste (Cocoricó); Arg - toothpaste containing arginine (Colgate Sensitive Pro-Relief); Nov - calcium sodium phosphosilicate toothpaste (Sensodyne Repair and Protect); SnF - fluoride-containing toothpaste (AmF/SnCl2/SnF2 - Elmex Erosion); and Control (no erosive/abrasive process). The erosive/abrasive cycle consisted of immersion in citric acid (1%, pH 2.6, 5 min, 4×/day) and abrasion (2×/day, 120-20 sec abrasion, 100 sec immersion) with each toothpaste. During intervals, samples were immersed in artificial saliva. This cycle was performed for five days. Two resin cylinders (2 mm in diameter) were constructed on each sample for the shear bond strength test using a universal adhesive system. The self-etch and etch-and-rinse (Scotchbond Universal) strategies were employed, each in half of the total sample (n=10). Bond strength (MPa) was measured in a shear test and failure modes were assessed with a stereomicroscope. Statistical analysis was performed using the two-way analysis of variance (ANOVA) and Tukey tests (p<0.05). RESULTS: A statistically significant difference was found between the adhesive strategies tested (p<0.001), with the self-etching form showing higher values than the etch-and-rinse. Moreover, no significant differences were observed between the tested toothpastes (p=0.750) and interactions (p=0.438). CONCLUSION: The use of toothpaste containing obliterating agents does not affect bond strength to dentin subjected to erosive/abrasive conditions when a universal adhesive is used. However, the self-etch strategy might be preferred for eroded/abraded dentin.

CO2 laser irradiation combined with fluoridated dentifrice improved its protective effect on caries lesion progression regardless of the acidulated phosphate fluoride gel application: An in situ study.

OBJECTIVE: This in situ study aimed to investigate the efficacy of CO2 laser at a 10.6-µm wavelength combined with 1.23% acidulated phosphate fluoride (APF) and fluoridated dentifrice with 1100 µg F/g (FD) to control enamel caries progression. MATERIALS AND METHODS: Sixteen volunteers wore palatal appliances containing eight demineralized enamel specimens for four 14-day phases under sucrose exposure. These specimens were submitted to CO2 laser irradiation and APF alone or combined with FD. Treatment groups were non-fluoridated dentifrice-NFD, NFD + CO2 laser, NFD + APF, NFD + CO2 laser + APF, FD, FD + CO2 laser, FD + APF, and FD + CO2 laser + APF. Mineral loss, calcium fluoride (CaF2), fluorapatite (FAp), and fluoride in the biofilm were analyzed by analysis of variance followed by the Student-Newman-Keuls test, p < 0.05. RESULTS: The highest mineral loss inhibition was noted when FD and CO2 laser irradiation were combined, which did not significantly differ from the FD + CO2 laser + APF group. The CaF2, FAp, and F in the biofilm were more pronounced when the FD and APF were combined. The CO2 laser irradiation promoted a slightly higher concentration of CaF2 in the enamel and F in the biofilm. CONCLUSION: Although APF promotes the high formation of CaF2 and FAp, the combined use of FD with CO2 laser overcomes the APF effect in inhibiting the progression of artificial caries-like lesions in situ. CLINICAL SIGNIFICANCE: Under the in situ design of this study, remineralization of white spot lesions was achieved through CO2 laser irradiation and daily use of fluoridated dentifrice. Future clinical trials are encouraged to substantiate this finding.

Longevity of extrinsic stains on monolithic zirconia restorations: An in vitro study.

STATEMENT OF PROBLEM: Three-mol% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP) has been commonly used for fixed prosthodontic restorations. The opacity of 3Y-TZP may be masked with external staining, although the longevity of extrinsic stains applied to monolithic zirconia is unclear. PURPOSE: The purpose of this in vitro study was to analyze the color and surface roughness of extrinsically stained zirconia specimens after thermocycling and toothbrushing. MATERIAL AND METHODS: Monolithic Ø12.5×1.25-mm zirconia disks were milled from 3Y-TZP blocks, sintered according to manufacturer instructions, and then divided into 3 groups (C, J, and O; n=16) for application of stain and glaze. All specimens underwent 10 000 thermocycles in distilled water before being further divided into 2 dentifrice groups (n=8): normal grit, low relative dentin abrasivity (RDA) (Subgroup N) and abrasive grit, high RDA (Subgroup A). Specimens were brushed in a multistation brushing machine under 1.47 N of force using a 5:8 toothpaste and distilled water slurry for 10 000 cycles with a straight (American Dental Association Standard) toothbrush to simulate 1 year of toothbrushing. Color and surface roughness measurements were obtained at 3 time points: baseline, after thermocycling, and after brushing. A 2-way repeated measures ANOVA was used to independently assess changes in color and surface roughness with respect to thermocycling and brushing (α=.05). RESULTS: Group J displayed no significant change in color for either dentifrice system (P>.05). However, a significant change in surface roughness was observed for both dentifrice subgroups (P<.001). Group C specimens displayed significant changes in color (P<.001) and surface roughness (P<.001) for both dentifrice systems. Group O specimens displayed significant changes in color (P<.025) for both dentifrice systems and significant changes in surface roughness (P<.004) for subgroup A, but no significant changes for subgroup N (P=.075). CONCLUSIONS: Artificial aging of monolithic zirconia resulted in changes in color and surface roughness that did not surpass the thresholds for perceptibility and acceptability. This study failed to establish durability limits for extrinsic stains applied to 3Y-TZP.

Effectiveness of Herbal, Homeopathic and Conventional Dentifrices on Dental Caries - A Double-Blind Randomised Controlled Trial.

PURPOSE: To compare the effectiveness of ayurvedic, homeopathic and conventional dentifrices on plaque and saliva in terms of cariogenic bacteria, salivary pH, and plaque pH. MATERIALS AND METHODS: This double-blinded, parallel-group, randomised controlled trial was performed at Saveetha Dental College and Hospitals, Chennai, India. The participants comprised healthy adults possessing more than 20 permanent natural teeth and having a Decayed Missing and Filled Teeth (DMFT) score, plaque index score, and gingival index score less than or equal to 2. There were 3 intervention groups: 1: herbal dentifrice (Dabur Meswak); 2: homeopathic dentifrice (Gum Forte gel); 3: fluoride dentifrice (Colgate Total). The outcome measures were as follows: plaque and saliva samples were evaluated for pH; colony counts of Streptococcus mutans and Lactobacillus at baseline, 14 and 28 days of follow-up. One-way and repeated measures ANOVA, Wilcoxon signed-rank and Kruskal Wallis tests were used to compare the mean differences of plaque and salivary pH and plaque and salivary S. mutans and Lactobacillus counts at baseline, 14 and 28 days. RESULTS: The mean S. mutans and Lactobacillus counts in plaque and saliva decreased statistically significantly in all treatment groups at the 28-day follow-up. Mean plaque pH was not statistically significantly different at the 14-day follow-up (p-value = 0.16). On the 28th day, group 1 (7.64 ± 0.20) showed the highest increase in plaque pH followed by group 2 (7.39 ± 0.25) and group 3 (7.27 ± 0.19), which was found to be statistically significant. No statistically significant difference in mean salivary pH was observed between the three groups at the different time points. CONCLUSION: This study reveals that the herbal dentifrice tested here was effective in reducing cariogenic bacterial count and increasing the plaque pH, thereby warranting the usage of the same.

Effect of Tooth Brushing Cycles and Dentifrice Fluoride Concentration on a Glazed CAD/CAM Ceramic.

PURPOSE: To evaluate the effect of tooth brushing and dentifrice fluoride (F-) concentration on changes in color and translucency (ΔE00 and ΔT00, respectively), surface gloss (GS), surface roughness (Sa), and microstructure of a glazed CAD/CAM ceramic. MATERIALS AND METHODS: Ceramic blocks (e.max/CAD) were sectioned into rectangular plates (14 x 12 x 1 mm), and one surface of each sample was glazed. Samples were divided into three groups according to the F- concentration in the dentifrice (0, 1,100, and 5,000 µg/g) and were then subjected to 60,000 tooth brushing cycles. Luminosity and color were measured using a spectrophotometer at baseline and after every 20,000 cycles to obtain their ΔE00 and ΔT00 values. Another set of samples was prepared to measure the GS with a gloss meter and the Sa with a confocal laser microscope. The GS and Sa results were subjected to analysis of variance, Tukey test, and Dunnett test (α = .05). RESULTS: After 60,000 tooth brushing cycles, all of the variables were clinically acceptable, and there were no significant differences in the ΔE00, ΔT00, GS, or Sa among the fluoridated dentifrices. The GS values decreased significantly as the number of tooth brushing cycles increased. CONCLUSION: The ΔE00, ΔT00, GS, and Sa values were all clinically acceptable after the glazed e.max/CAD ceramic had been subjected to 60,000 tooth brushing cycles with dentifrices containing up to 5,000 µg/g of F-.

A comparison of toothpaste tablets and a sodium fluoride dentifrice for the control of supragingival plaque and gingivitis: A 2-week randomized controlled trial.

PURPOSE: To compare toothpaste tablets containing 0.243% sodium fluoride and a conventional sodium fluoride dentifrice for gingivitis and plaque control over a 2-week period. METHODS: Forty adult participants were randomized into two groups: Toothpaste tablets (Colgate Anywhere Travel Toothpaste Tablets) and conventional dentifrice (Colgate Cavity Protection). A blinded examiner measured the gingival and plaque index at baseline and after 2 weeks. A questionnaire was distributed at the end to determine overall satisfaction of the product used. Statistical analyses were performed separately for the gingival index and plaque index scores. Comparisons of the two treatment groups with respect to baseline and 2-week gingival index and plaque index scores were performed using Mann-Whitney U-test. Within-treatment comparisons of the gingival index and plaque index scores obtained at the 2-week examinations versus baseline were performed using Wilcoxon test. RESULTS: Both groups had statistically significant improvements in plaque control at the 2-week visit (P< 0.05). There was no statistically significant difference between groups for gingival and plaque index at the 2-week visit (P> 0.05). Overall satisfaction for both products were positive while perception on "texture/foaminess" was more negative for toothpaste tablets (P= 0.001). The results showed that toothpaste tablets' short-term performance on gingivitis and plaque control was equivalent to conventional dentifrice while the " texture/foaminess" of toothpaste tablets was found to be less appealing. CLINICAL SIGNIFICANCE: Toothpaste tablets are a relatively new form of toothpaste that can be a viable alternative to conventional dentifrice with the added benefit of an eco-friendly way of maintaining oral hygiene.